View source for Scanning PCR Gel

===Materials===
* Your membrane
* A sheet protector

===Methods===
# After the gel is done running, disconnect the power source and remove gel onto a piece of paper or a paper towel
# Dry the gel a little and place into the scanner
# Turn on the scanner and press the play/forward button at the bottom of the program screen to see your gel
# Hit ‘gel’ on the top left, and select the UV302 setting
# Select auto exposure and then capture
# Once the image appears, hit invert
# Use the ‘W’ slider to increase or decrease the brightness of the gel to see the bands clearer 
# Print the image when you are done and discard the gel